smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Phison Driven OEM SSDs
Device Model:     SPCC Solid State Disk
Serial Number:    --
Firmware Version: S9FM02.6
User Capacity:    120,034,123,776 bytes [120 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
TRIM Command:     Available
Device is:        In smartctl database 7.3/5319
ATA Version is:   ACS-3 (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Aug 22 09:47:57 2024 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Disabled
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   30) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (   2) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     -O-R--   100   100   000    -    0
  9 Power_On_Hours          -O--C-   100   100   000    -    9079
 12 Power_Cycle_Count       -O--C-   100   100   000    -    4236
168 SATA_Phy_Error_Count    -O--C-   100   100   000    -    0
170 Bad_Blk_Ct_Erl/Lat      PO--C-   100   100   010    -    0/30
173 MaxAvgErase_Ct          ------   100   100   000    -    248 (Average 3200)
192 Unsafe_Shutdown_Count   -O--C-   100   100   000    -    47
194 Temperature_Celsius     PO---K   070   070   000    -    30
196 Not_In_Use              ------   100   100   000    -    0
218 CRC_Error_Count         ------   100   100   000    -    660
241 Lifetime_Writes_GiB     -O--C-   100   100   000    -    12897333
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O     51  Comprehensive SMART error log
0x03       GPL     R/O     64  Ext. Comprehensive SMART error log
0x04       GPL,SL  R/O      8  Device Statistics log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log

SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 277 (device log contains only the most recent 256 errors)
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 277 [20] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  84 -- 51 53 52 00 00 00 96 9c f8 40 00  Error: ICRC, ABRT 21330 sectors at LBA = 0x00969cf8 = 9870584

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 53 52 00 00 00 96 9c f8 40 00     00:11:08.320  READ DMA EXT
  ff 00 d5 00 01 00 00 00 00 00 01 00 ff     00:11:08.318  [VENDOR SPECIFIC]
  25 00 00 53 52 00 00 00 96 9c f8 40 00     00:11:08.313  READ DMA EXT
  ff 00 d5 00 01 00 00 00 00 00 01 00 ff     00:11:08.311  [VENDOR SPECIFIC]
  25 00 00 53 52 00 00 00 96 9c f8 40 00     00:11:08.286  READ DMA EXT

Error 276 [19] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  84 -- 51 01 00 00 00 0d f5 75 00 40 00  Error: ICRC, ABRT 256 sectors at LBA = 0x0df57500 = 234190080

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 01 00 00 00 0d f5 75 00 40 00     00:02:47.211  READ DMA EXT
  25 00 00 00 c0 00 00 0d e9 7a 40 40 00     00:02:47.210  READ DMA EXT
  25 00 00 00 40 00 00 0d e9 7a 00 40 00     00:02:47.209  READ DMA EXT
  25 00 00 01 00 00 00 0d e9 7b 00 40 00     00:02:47.209  READ DMA EXT
  25 00 00 00 c0 00 00 0d e9 78 40 40 00     00:02:47.207  READ DMA EXT

Error 275 [18] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  84 -- 51 08 50 00 00 00 ae 37 70 40 00  Error: ICRC, ABRT 2128 sectors at LBA = 0x00ae3770 = 11417456

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 08 50 00 00 00 ae 37 70 40 00     00:00:59.360  READ DMA EXT
  25 00 00 00 40 00 00 00 64 ea 00 40 00     00:00:59.359  READ DMA EXT
  25 00 00 00 33 00 00 00 7c a2 c0 40 00     00:00:59.358  READ DMA EXT
  25 00 00 00 40 00 00 00 64 c5 c0 40 00     00:00:59.358  READ DMA EXT
  25 00 00 00 96 00 00 00 95 cf 48 40 00     00:00:59.356  READ DMA EXT

Error 274 [17] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  84 -- 51 03 50 00 00 04 65 05 68 40 00  Error: ICRC, ABRT 848 sectors at LBA = 0x04650568 = 73729384

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 03 50 00 00 04 65 05 68 40 00     00:00:58.966  READ DMA EXT
  25 00 00 02 08 00 00 03 ee d9 c0 40 00     00:00:58.965  READ DMA EXT
  25 00 00 02 00 00 00 0a 51 d7 b0 40 00     00:00:58.963  READ DMA EXT
  25 00 00 02 00 00 00 06 ac ce 50 40 00     00:00:58.961  READ DMA EXT
  25 00 00 02 00 00 00 04 91 24 c0 40 00     00:00:58.959  READ DMA EXT

Error 273 [16] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  84 -- 51 0b 80 00 00 00 00 29 80 40 00  Error: ICRC, ABRT 2944 sectors at LBA = 0x00002980 = 10624

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 0b 80 00 00 00 00 29 80 40 00     00:00:20.675  READ DMA EXT
  25 00 00 00 80 00 00 00 00 29 00 40 00     00:00:20.674  READ DMA EXT
  25 00 00 00 80 00 00 00 00 fb 80 40 00     00:00:18.344  READ DMA EXT
  25 00 00 00 80 00 00 00 00 78 80 40 00     00:00:18.343  READ DMA EXT
  25 00 00 00 80 00 00 00 00 5f 00 40 00     00:00:18.343  READ DMA EXT

Error 272 [15] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  84 -- 51 00 01 00 00 00 00 00 01 00 ff

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  ff 00 d5 00 01 00 00 00 00 00 01 00 ff     00:01:19.929  [VENDOR SPECIFIC]
  25 00 00 08 00 00 00 0d ed 18 48 40 00     00:01:19.927  READ DMA EXT
  25 00 00 08 00 00 00 0d ed 10 48 40 00     00:01:19.924  READ DMA EXT
  25 00 00 08 00 00 00 0d ed 08 48 40 00     00:01:19.921  READ DMA EXT
  25 00 00 08 00 00 00 0d ed 00 48 40 00     00:01:19.919  READ DMA EXT

Error 271 [14] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  84 -- 51 08 00 00 00 0d ec d8 48 40 00  Error: ICRC, ABRT 2048 sectors at LBA = 0x0decd848 = 233625672

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 08 00 00 00 0d ec d8 48 40 00     00:01:19.901  READ DMA EXT
  25 00 00 08 00 00 00 0d ec d0 48 40 00     00:01:19.898  READ DMA EXT
  25 00 00 08 00 00 00 0d ec c8 48 40 00     00:01:19.896  READ DMA EXT
  25 00 00 08 00 00 00 0d ec c0 48 40 00     00:01:19.893  READ DMA EXT
  25 00 00 08 00 00 00 0d ec b8 48 40 00     00:01:19.891  READ DMA EXT

Error 270 [13] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  84 -- 51 08 00 00 00 0d ec a0 48 40 00  Error: ICRC, ABRT 2048 sectors at LBA = 0x0deca048 = 233611336

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 08 00 00 00 0d ec a0 48 40 00     00:01:19.880  READ DMA EXT
  25 00 00 08 00 00 00 0d ec 98 48 40 00     00:01:19.877  READ DMA EXT
  25 00 00 08 00 00 00 0d ec 90 48 40 00     00:01:19.874  READ DMA EXT
  25 00 00 08 00 00 00 0d ec 88 48 40 00     00:01:19.871  READ DMA EXT
  ff 00 d5 00 01 00 00 00 00 00 01 00 ff     00:01:19.869  [VENDOR SPECIFIC]

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      7564         -
# 2  Short offline       Completed without error       00%      7555         -
# 3  Short offline       Completed without error       00%      7282         -
# 4  Short offline       Completed without error       00%      7195         -
# 5  Short offline       Completed without error       00%      7094         -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Commands not supported

Device Statistics (GP Log 0x04)
Page  Offset Size        Value Flags Description
0x07  =====  =               =  ===  == Solid State Device Statistics (rev 1) ==
0x07  0x008  1               8  ---  Percentage Used Endurance Indicator
                                |||_ C monitored condition met
                                ||__ D supports DSN
                                |___ N normalized value

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  4           56  Transition from drive PhyRdy to drive PhyNRdy
0x000a  4           10  Device-to-host register FISes sent due to a COMRESET
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0010  2            0  R_ERR response for host-to-device data FIS, non-CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x0013  2            0  R_ERR response for host-to-device non-data FIS, non-CRC



